Tube furnaces are mainly used in metallurgy, glass, heat treatment, lithium battery positive and negative materials, new energy, LED luminescent materials, abrasive tools and other industries to measure materials under certain atmosphere conditions.Heat treatment process of gear vacuum carburizing and quenching The tube furnace is protected by hydrogen filling after vacuuming, and uses the principle of medium frequency induction heating to generate high temperature in the tungsten crucible in the coil tube, and conducts it through thermal radiation. Powder forming and sintering of tungsten, molybdenum and their alloys.Deformation correction of 20CrMo steel plate by vacuum carburizing and quenching 1. After the tube furnace is used for the first time or not used for a long time, it should be baked at a temperature of about 120°C for 1 hour, and then used at a temperature of about 300°C for 2 hours to avoid cracking.HD700-3D/HD1000-3D/HD1250-3D HIGH SPEED 3D CNC BEAMS DRILLING LINE The furnace temperature should not exceed the rated temperature as far as possible, so as not to damage the heating element and furnace lining. It is forbidden to directly inject various liquids and dissolved metals into the furnace, and keep the furnace clean.D SERIES CNC DRILLING MACHINE FOR PLATES 2. If a quartz tube is used in a tube furnace, when the temperature is higher than 1000°C, the high temperature part of the quartz tube will become opaque. This is called devitrification, which is an inherent defect of quartz glass tubes and is normal.
top of page
Forum
We all come from different backgrounds. Many of us have the same story. We want to know yours.
Not ready to share yet? That's okay. Maybe you're still trying to figure out how you feel about your changing beliefs. Or maybe you live in a place where apostasy is punishable by death. Whether you just want to read, contribute anonymously, or engage in respectful debate, we hope you find comfort connecting with the growing community of others who dared to doubt.
For safety's sake, log-in is required to post in the forum. You may remain anonymous and you are not required to participate. Only to respect your fellow doubters. We’re all in varying stages of questioning and withdrawal. Those who faith-shame or fear-monger may be asked to leave. Help keep our community supportive and safe!
bottom of page
ty